Evans Coolant EC72064 and EC42001 Powersports Waterless Coolant and Prep Fluid Combo Pack, 2 Gallon

Evans Powersports Waterless Coolant is specifically designed for MX Bikes, Trail Bikes, Enduro Bikes, Street Bikes, Quad Bikes, ATVs, UTVs and Snowmobiles. Evans Waterless Coolants have a boiling point above 375 Degree Fahrenheit and will not vaporize, eliminating overheating, boil-over and after-boil, while generating very low vapor pressures reducing strain on engine cooling system components. Contains no oxygen, effectively eliminating corrosion, liner and cooling pump erosion. Eliminates pre-ignition and detonation caused by overheating, improving combustion efficiency and delivering more power. Provides low temperature freeze protection with a freezing point below -40F. Evans Waterless Coolants are Less Toxic. Standard anti-freeze is toxic and known to kill pets. Evans Prep Fluid is a waterless cooling system flush designed to seek out remaining water after draining the cooling system of an engine. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. A minimum of 2 gallons of Prep Fluid is recommended for heavy duty diesel engines and 1 gallon of Prep Fluid is recommended for all motorcycles converting to High Performance Coolant or Powersports. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only. Evans Coolant contains a bittering agent/bitterant.

• Combo Pack contains two 64 oz. bottles of Evans Powersports Waterless Coolant with a 1 gallon bottle of Evans Prep Fluid for a complete coolant swap. This product contains a bittering agent.
• Evans Powersports Waterless Coolant is specifically designed for MX Bikes, Trail Bikes, Enduro Bikes, Street Bikes, Quad Bikes, ATVs, UTVs and Snowmobiles
• Evans Waterless Coolants have a boiling point above 375 Degree Fahrenheit and will not vaporize, eliminating overheating, boil-over and after-boil, while generating very low vapor pressures reducing strain on engine cooling system components
• Evans Prep Fluid is a waterless cooling system flush designed to seek out remaining water after draining the cooling system of an engine, helping remove any residual water
• Water removal is critical as a water content higher that 3% will lower the boiling point, and may reduce the corrosion and pump cavitation protection of Evans Waterless Coolant